To meet the needs of more users, we also officially launched the EXScan S_v3.2.0.1 in September this year. Compared with EXScan S_v3.1.3.0, this version has some new features:
★ Support macOS and its recommended configuration are as following:
MacBook Air (2020, 2022)
MacBook Pro (2021, 2022)
iMac (2020)
★ Operation of trackpad gestures
★ Alignment mode
Various alignment modes are provided in the software. Selecting a suitable alignment mode for different scanned objects will help you get data efficiently.
For EinScan SE V2,
 |  |
| turntable alignment | features alignment |
Note:
- When you select the turntable in the alignment mode, the default is to use the turntable for scanning. We get the position information of the turntable by calibration and verifying.
- The turntable is disabled under the features alignment mode.
- When choosing features alignment, the data is aligned by features. And only automatic alignment of a single frame is supported.
For EinScan SP V2,
 |  |
| turntable alignment | turntable coded target alignment |
 |  |  |
| hybrid alignment | markers alignment | global markers alignment |
Note：
- When you select the turntable in the alignment mode, the default is to use the turntable for scanning. We get the position information of the turntable by calibration and verifying.
- The turntable is disabled under the features and hybrid align mode.
- The Use existed verify data option is disabled after choosing the turntable coded targets, markers, global markers alignment mode.
- When the scanned object is rich in features, hybrid alignment mode is recommended.
- When selecting hybrid alignment mode, the software can switch between features and markers alignment automatically during scanning according to whether the surface of the scanned object has markers or not. So, you can put markers only on surfaces with little geometry. There is no need to stick markers all over the object.
★ Background cutting
When this function is turned on, the background of the scanned object will be automatically shielded. The larger the value is set, the larger the shielding range.
scanning without background cutting
 |  |
scanning with background cutting
 |  |
★ Quick alignment
Clicking the "Quick Alignment" button will align the object with the coordinate frame. The direction of the frame after alignment is: Z axis is up, X axis is forward, Y axis is right. And the coordinate frame will be in the center of the object bounding box.
Click Move to move the coordinate frame to the center of the bottom of the object.
Click Reset to restore the coordinate frame to its original state (before opening the function).
Click Close to apply the adjusted coordinate frame and exit.
★ Updated UI interface
Updated UI interface looks clearer and more user friendly. Many post-processing tools are provided to meet your needs.
