After EinScan LibreOS v1.0.3.0 update, it now supports casting its screen via Wi-Fi or Hotspot to several stream devices and supports remote control through your stream device.
The general idea is your stream device and the EinScan Libre are connected to the same local network (LAN).
Step 1 Enable Casting
Enable casting from the control panel or Settings - General Settings - Cast
Step 2 Join Wi-Fi or Enable Hotspot
Select casting connection via Wi-Fi or Hotspot
Wi-Fi
Click Wi-Fi, join the Wi-Fi which is going to be used for casting, if your scanner has already connected to a Wi-Fi, you will not see the following page, and it directly jumps to Step 3.
HotSpot
Click Hotspot, the scanner will enable Hotspot and is ready for starting the casting service.
Step 3 Start Casting Service
Click Start Casting to enable the casting service.
Step 4 Connect the Stream Device to the Same Wi-Fi or Join
the Hotspot
Wi-Fi
Use your steam device to scan the Step 1 QR code to join the same Wi-Fi that EinScan Libre has connected or manually join the same Wi-Fi
Hotspot
Use your steam device to scan the Step 1 QR code to join the Hotspot or go to Settings - Hotspot, where you can find the Hotspot name and password for manual connection.
Step 5 Receive Casting
Use your stream device to scan the Step 2 QR code or put the URL in your browser to receive casting stream.
